Effect of Nanoscale in Situ Interface Welding on the Macroscale Thermal Conductivity of Insulating Epoxy Composites: A Multiscale Simulation Investigation.

Insulating thermally conductive polymer composites are in great demand in integrated-circuit packages, for efficient heat dissipation and to alleviative short-circuit risk. Herein, the continuous oriented hexagonal boron nitride (h-BN) frameworks (o-BN@SiC) were prepared via self-assembly and in situ chemical vapor infiltration (CVI) interface welding. The insulating o-BN@SiC/epoxy (o-BN@SiC/EP) composites exhibited enhanced thermal conductivity benefited from the CVI-SiC-welded BN-BN interface. Further, multiscale simulation, combining first-principles calculation, Monte Carlo simulation, and finite-element simulation, was performed to quantitatively reveal the effect of the welded BN-BN interface on the heat transfer of o-BN@SiC/EP composites. Phonon transmission in solders and phonon-phonon coupling of filler-solder interfaces enhanced the interfacial heat transfer between adjacent h-BN microplatelets, and the interfacial thermal resistance of the dominant BN-BN interface was decreased to only 3.83 nK·m2/W from 400 nK·m2/W, plunging by over 99%. This highly weakened interfacial thermal resistance greatly improved the heat transfer along thermal pathways and resulted in a 26% thermal conductivity enhancement of o-BN@SiC/EP composites, compared with physically contacted oriented h-BN/EP composites, at 15 vol % h-BN. This systematic multiscale simulation broke through the barrier of revealing the heat transfer mechanism of polymer composites from the nanoscale to the macroscale, which provided rational cognition about the effect of the interfacial thermal resistance between fillers on the thermal conductivity of polymer composites.

HIF-1α aggravated traumatic brain injury by NLRP3 inflammasome-mediated pyroptosis and activation of microglia.

Hypoxia inducible factor 1 alpha (HIF-1α) is involved in regulating the biological functions of neuronal death after traumatic brain injury (TBI), and attaches importance in the inflammatory response, but its potential mechanism is still unknown. Our study aimed to explore the regulatory mechanism between HIF-1α and NLRP3 inflammasome after TBI. Male mice underwent controlled cortical impact (CCI) or sham-operated procedures. Brain water content and blood-brain barrier permeability were measured at the indicated time after TBI. The behavioral performance, ELISA, immunofluorescence, and western blot analysis were used to determine whether HIF-1α specifically targeted TBI-induced pyroptosis. We discovered that TBI-induced brain injury caused by external mechanical forces is characterized by edema and blood-brain barrier disorder, and the release of IL-1ß, IL-18, and LDH and upregulation of HIF-1α expression, reaching the peak on the third day post-TBI. In addition, HIF-1α accumulated NLRP3 inflammasome-mediated pyroptosis and activation of microglia. The protein expressions of NLRP3, GSDMD, GSDMD-N, pro-caspase 1, and cleaved caspase 1 were markedly increased in the injured cortex, which were restored to normal levels by the interference of HIF-1α. The inactivation of HIF-1α conferred neuroprotection and alleviated brain injury after TBI. HIF-1α was implicated in TBI-induced brain injury, aggravated NLRP3 inflammasome -mediated pyroptosis, and the activation of microglia, which provided a potential target for treating TBI.

Widely tunable single-/dual-wavelength fiber lasers with ultra-narrow linewidth and high OSNR using high quality passive subring cavity and novel tuning method: erratum.

We provide a corrected equation of our previous publication [Opt. Express24, 19760 (2016)10.1364/OE.24.019760].

Highly Thermally Conductive Polyimide Composites via Constructing 3D Networks.

Easy and high efficient methods are in great demand to obtain polyimide (PI) composites with high thermal conductivity in the electronic packaging field. In this work, PI/boron nitride (BN) composites with high thermal conductivity are easily fabricated. Tightly connected and well-arranged BN platelets construct effective 3D thermally conductive networks in the PI matrix upon hot pressing, after BN platelets are coated on the surface of PI granules by the help of a kind of PI adhesive. The thermal conductivity of the PI/BN composites reaches as high as 4.47 W mK-1 at a low BN loading of 20 vol%, showing an enhancement of 2099%, compared to pure PI. Such enhancement of the thermal conductivity is the highest compared with the results in the open literature. Our work is a good example that utilized the sufficient physical connection (aggregates) of thermally conductive fillers to significantly promote the thermal conductivity of polymer composites.

Widely tunable single-/dual-wavelength fiber lasers with ultra-narrow linewidth and high OSNR using high quality passive subring cavity and novel tuning method.

High stability single- and dual-wavelength compound cavity erbium-doped fiber lasers (EDFLs) with ultra-narrow linewidth, high optical signal to noise ratio (OSNR) and widely tunable range are demonstrated. Different from using traditional cascaded Type-1/Type-2 fiber rings as secondary cavities, we nest a Type-1 ring inside a Type-2 ring to form a passive subring cavity to achieve single-longitudinal-mode (SLM) lasing with ultra-narrow linewidth for the first time. We also show that the SLM lasing stability can be further improved by inserting a length of polarization maintaining fiber in the Type-2 ring. Using a uniform fiber Bragg grating (FBG) and two superimposed FBGs as mode restricting elements, respectively, we obtain a single-wavelength EDFL with a linewidth as narrow as 715 Hz and an OSNR as high as 73 dB, and a dual-wavelength EDFL with linewidths less than 1 kHz and OSNRs higher than 68 dB for both lasing wavelengths. Finally, by employing a novel self-designed strain adjustment device capable of applying both the compression and tension forces to the FBGs for wavelength tuning, we achieve the tuning range larger than 10 nm for both of the EDFLs.